Description

Product Overview

Light Series is the indoor model in our switching power supply range: a 24 V unit made for interior projects and home decoration rather than for exposed outdoor work. As an LED power supply manufacturer we built it around one job, driving 24 V LED loads such as strip runs, cabinet lighting and residential lighting circuits, so the case, the terminals and the output are all aimed at fitting neatly into ceilings, cabinets and distribution points. It is a constant voltage LED power supply, which means the output holds steady as the strip warms up or as part of the run is switched. Installers usually fit it once and forget it. The five available ratings cover different circuit sizes, and the sections below explain how to match one to your project.

Key Features

Pure copper transformer — the winding is copper rather than a substitute metal, so it conducts efficiently and leaves less heat inside the case. That construction is what makes this a pure copper transformer LED power supply rather than a copper-coloured label.
60% power safety margin — the design keeps a wide gap between the working load and the transformer's limit, so start-up surges and small additions later do not push the unit into overload.
Low-temperature running — heat is what ages a power supply, and a cooler case means the internal parts age more slowly, which matters most inside sealed cabinets and ceiling voids.
Long service life — a cool transformer and steady output together mean fewer replacements across the life of a lighting installation.
Steady 24 V output — a 24 V LED strip power supply has to hold voltage from the first fitting to the last, or the far end of the run looks dimmer than the near end.

Specifications

Model series	Light Series
Output voltage	24 V
Power ratings	60 W, 100 W, 200 W, 300 W, 400 W
Output type	Constant voltage
Transformer	Pure copper
Power safety margin	60%
Running temperature	Low-temperature operation
Service life	Long service life
Typical load	24 V LED strips and LED lighting systems
Typical environment	Interior projects, residential lighting and home decoration
Installation	Indoor use, fitted into a lighting circuit by an installer

Power Rating & Load Matching

Write down every load that will run from this 24 V LED power supply — each strip run, cabinet light and fixture, with its rated wattage.
Add those figures together to get the total load for the circuit, then allow a little for anything you plan to connect later.
Choose the rating above that total: 60 W and 100 W suit short runs and single fixtures, 200 W and 300 W cover whole-room lighting, and 400 W handles the largest residential circuits.
Check the space the unit will sit in as well, because the rating you choose still has to fit the cabinet, ceiling void or distribution point you have.
If your total sits very close to a rating, step up to the next size rather than down. A supply that runs hot is the expensive mistake.

Heat, Cooling & Service Life

Where a power supply is installed decides how long it lasts. In a ceiling void, a cabinet or a closed distribution box there is very little moving air, so whatever heat the unit makes stays around it. Running at a low temperature is what makes this model suited to exactly those awkward indoor positions. Fitting practice helps too: leave some free air around the case, keep it clear of insulation and other heat sources, and avoid pressing it tight against the back of a cabinet. Because the transformer runs cool, the internal parts go through less thermal stress, which is what protects the long service life expected from an LED power supply for interior lighting. If the only available position is completely enclosed, tell us and we will advise on spacing or a rating that suits those conditions.

Applications

Residential LED strip runs — living rooms, bedrooms and kitchens where one 24 V LED strip power supply drives the whole circuit, with steady output keeping brightness even across the run.
Home decoration lighting — coves, niches and feature walls, where a compact, cool-running unit can sit inside the structure without adding heat to the room it lights.
Interior fit-out projects — contractors working through a house or a small commercial interior can standardise on one series and change only the rating from room to room.
Cabinet and shelf lighting — enclosed joinery is the hardest place for any supply, and low-temperature running in an indoor format suits it far better than a large, hot unit.

Scale & Supply Capability

We are a China-based LED switching power supply manufacturer supplying wholesale and project buyers. Our portfolio covers a wide range of series, so you can source stable constant-voltage drivers, 12V/24V auto-sensing units, fully potted waterproof models for outdoor signs and landscape lighting, brightness-controlled units for advertising signs, and magnetic-mount versions for secure indoor installation — all from one supplier. Wholesale supply is available. Share your application and voltage requirement, and we will point you to the series that suits your order.

FAQ

Q1. What kinds of lighting can this power supply run?

It drives 24 V LED loads indoors: strip runs in living rooms, bedrooms and kitchens, cabinet and shelf lighting, and residential lighting circuits. Because it is an LED power supply for interior lighting, it is fitted inside the building, in ceilings, joinery or distribution points, rather than in exposed outdoor positions. Send us the application with your enquiry and we will confirm it suits the circuit.

Q2. Why does the transformer material matter?

Copper windings conduct efficiently and produce less internal heat than substitute materials, so the transformer stays cooler through long running hours. That cooler operation is the main reason this model holds up over years of daily switching, and it is why we build the winding in copper rather than a lighter, cheaper metal. When you compare quotes on a 24 V supply, the winding material is one of the first differences worth checking.

Q3. What does the 60% power safety margin mean for my project?

The design keeps a wide gap between your working load and the transformer's limit, so the unit is not driven to its maximum in everyday use. Plan the circuit with headroom, pick the rating above your total load, and the margin absorbs start-up surges and small additions later. As with any constant voltage LED power supply, confirm the final figure against the real load before ordering.

Q4. How do I decide between the five power ratings?

Work from the load rather than the size of the room. Add up the rated wattage of everything the supply will drive and round up to the next rating instead of down; rounding down is the mistake that leaves a unit running hot, while one size larger simply runs cooler. All five share the same construction, so the decision is about load, not features.

Q5. Can this model be dimmed?

It has a fixed 24 V output, so it suits lighting that is switched on and off rather than dimmed. If your project needs brightness control, mention it when you enquire: we build dimmable models in the same range and will point you to the one that matches your control method and load.

Q6. Can it be used outdoors or in a wet location?

No. This model belongs to our indoor range and is designed for interior projects and home decoration. Wherever moisture, dust or direct weather reaches the supply, a potted, weather-protected construction is the right choice instead. Tell us the installation conditions and we will recommend the model that suits the position.