| Product type | Indoor LED power supply for magnetic lamp and track lighting |
| Output voltage | 48V |
| Power ratings | 100W, 200W |
| Mounting | Magnetic base with snap reinforcement |
| Reinforcement | Dual — magnetic fixing plus mechanical snap |
| Beam adjustment | Lamp fixtures slide left or right along the track |
| Construction | All-in-one housing; no separate mounting bracket |
| Typical applications | Residential, office, showroom and commercial, exhibition and gallery lighting |
Choosing between the two versions comes down to what the run has to carry. Add up the rated wattage of every lamp head on the track and compare that figure with the unit: 100W suits compact accent runs with a handful of heads, while 200W covers longer tracks, larger heads and layouts where more fittings may be added later. Leave sensible headroom instead of running a driver at its limit, because start-up draw and voltage drop along a long rail both eat into the available margin. As a 48V LED power supply, the output has to match the heads on the run, so keep the whole system on one voltage.
We are a China-based LED switching power supply manufacturer supplying wholesale and project buyers. Our portfolio covers a wide range of series, so you can source stable constant-voltage drivers, 12V/24V auto-sensing units, fully potted waterproof models for outdoor signs and landscape lighting, brightness-controlled units for advertising signs, and magnetic-mount versions for secure indoor installation — all from one supplier. Wholesale supply is available. Share your application and voltage requirement, and we will point you to the series that suits your order.
It is made for 48V magnetic lamp and track lighting. The rail family and the connector are what decide a direct fit, so send us your rail profile and a photo of the track end and we will confirm before you order.
Start with the label on the old unit: output wattage, connector type and the size of the housing, then compare it with the run you are feeding. A like-for-like rating keeps the layout unchanged; if the old driver was working hard, moving up a rating is worth discussing. Send a photo of the label and the rail and we will check the fit before you order.
This is an indoor LED power supply, designed for interiors such as homes, offices, shops, galleries and exhibition spaces. For positions exposed to rain, spray or heavy condensation, our weather-protected ranges are the better answer. Tell us where the driver will sit and what it will be exposed to, and we will confirm the right construction.
Keep them in the original carton until they are needed, away from standing water, dust and heavy foot traffic. Check the housing and the connector for damage before installation, and handle the unit by the body rather than pulling on the track connector. On long projects, store drivers in a dry room rather than an open site container.
Yes — that is the practical advantage of the magnetic fixing. The unit lifts out of the track, a replacement seats in the same position, and no ceiling panel has to come down, which matters in shops and galleries that cannot close for long. Keep the old label details on file so the replacement matches the original rating.
One unit normally feeds one continuous run, with the driver seated in that rail. If the layout has separate tracks, islands or a run split by a wall, send us the plan and we will tell you how many units the layout needs. Keeping each run on its own supply also makes faults easier to trace.
